Show simple item record
dc.contributor.author |
Cardoso Anastácio, Aline
|
cze |
dc.contributor.author |
Šelešovský, Jakub
|
cze |
dc.contributor.author |
Künzel, Martin
|
cze |
dc.contributor.author |
Kučera, Jindřich
|
cze |
dc.contributor.author |
Pachman, Jiří
|
cze |
dc.date.accessioned |
2020-03-19T12:59:51Z |
|
dc.date.available |
2020-03-19T12:59:51Z |
|
dc.date.issued |
2019 |
eng |
dc.identifier.issn |
1733-7178 |
eng |
dc.identifier.uri |
https://hdl.handle.net/10195/74985 |
|
dc.description.abstract |
PlSEM is a plastic explosive based on RDX, PETN and non-explosive binder used in linear shaped charges for demolition purposes. Experimentally obtained detonation parameters are presented in this contribution. The detonation velocity was measured for cylindrical charges of various diameters, with and without confinement. The detonation pressure and particle velocity were determined using impedance window matching technique, and cylinder tests were used to obtain parameters of the JWL equation of state of the detonation products. The detonation velocity from 7.75 to 8.05 km·s -1 were obtained for unconfined charges with diameters from 4 mm to 8 mm, and from 8.15 to 8.24 km·s-1 for charges with 25 mm diameter. The experimentally determined detonation pressure was found to be 24.6 GPa. |
eng |
dc.format |
p. 487-503 |
eng |
dc.language.iso |
eng |
eng |
dc.publisher |
The Publishing of Łukasiewicz – Institute of Industrial Organic Chemistry |
|
dc.relation.ispartof |
Central European Journal of Energetic Materials, volume 16, issue: 4 |
eng |
dc.rights |
open access (CC BY-NC-ND 3.0) |
eng |
dc.rights.uri |
https://creativecommons.org/licenses/by-nc-nd/3.0/ |
|
dc.subject |
detonation velocity |
eng |
dc.subject |
PlSEM |
eng |
dc.subject |
plastic explosive |
eng |
dc.subject |
detonation pressure |
eng |
dc.subject |
cylinder test |
eng |
dc.subject |
detonační rychlost |
cze |
dc.subject |
PlSEM |
cze |
dc.subject |
plastická trhavina |
cze |
dc.subject |
detonační tlak |
cze |
dc.subject |
cylindr test |
cze |
dc.title |
Detonation Parameters of PlSEM Plastic Explosive |
eng |
dc.title.alternative |
Detonační parametry plastické trhaviny PlSEM |
cze |
dc.type |
article |
eng |
dc.description.abstract-translated |
PlSEM je plastická trhavina založená na RDX, PETN a nevýbušném pojivu používaná v táhlých náložích pro demoliční účely. V tomto příspěvku jsou uvedeny experimentálně získané detonační parametry této trhaviny. Detonační rychlost byla měřena pro válcové náboje různých průměrů, jak utěsněných tak i neutěsněných. Detonační tlak a rychlost částic byly stanoveny technikou impedančního okna, válcové nálože byly použity pro získání parametrů JWL stavové rovnice detonačních produktů. Detonační rychlost od 7,75 do 8,05 km · s -1 byla získána pro neutěsněné nálože s průměry od 4 mm do 8 mm a od 8,15 do 8,24 km · s-1 pro nálože s průměrem 25 mm. Experimentálně byl stanoven detonační tlak 24,6 GPa. |
cze |
dc.peerreviewed |
yes |
eng |
dc.publicationstatus |
published version |
eng |
dc.identifier.doi |
10.22211/cejem/112471 |
eng |
dc.relation.publisherversion |
http://www.wydawnictwa.ipo.waw.pl/cejem/Vol-16-Number-4-2019/CEJEM_01085.pdf |
eng |
dc.identifier.scopus |
2-s2.0-85054597299 |
|
dc.identifier.obd |
39883424 |
eng |
This item appears in the following Collection(s)
Show simple item record
Except where otherwise noted, this item's license is described as open access (CC BY-NC-ND 3.0)
|
Search DSpace
Browse
-
All of DSpace
-
This Collection
My Account
|