• Název: Formation tendency in transition metal based liquids and some related property changes in glassy state Typ: Article  Autor: Bán, Krisztián; Balla, S.; Novák, L.; Syabó, A.; Lovas, A. Datum: 2014

• Název: Airport charges – pricing patterns at selected european airports Typ: Article  Autor: Hoszman, Adam; Drahotský, Ivo Datum: 2014

• Název: Analytical calculation and experimental verification of lateral stiffness of a flexi-coil spring with tilting rubber-metal pad Typ: Article  Autor: Michálek, Tomáš; Vágner, Jakub; Kohout, Martin; Zelenka, Jaromír Datum: 2014

• Název: Effect of the different technological processes during and after casting of hypouetectic aluminium alloys on the eutectic Si particles morphology Typ: Article  Autor: Hurtalová, Lenka; Tillová, Eva; Chalupová, Mária Datum: 2014

• Název: Influence of modification on the structure and morphology of fracture of AlSi13Mg1CuNi silumin Typ: Article  Autor: Romankiewicz, Remigiusz; Romankiewicz, Ferdynand Datum: 2014

• Název: Nonlinear Wheel/Rail Contact Geometry Characteristics and Determination of Hertzian contact Typ: Article  Autor: Onat, Altan; Voltr, Petr; Lata, Michael Datum: 2014

• Název: The characterization of zinc plated surface after aged adhesives Typ: Article  Autor: Özdemir, Alp; Švanda, Pavel Datum: 2014

• Název: Intermetallic phases – TCP and Ni3X phases in cast and wrought nickel superalloys and its influence on mechanical properties Typ: Article  Autor: Belan, Juraj Datum: 2014

• Název: Fatigue life of synthetic nodular cast irons at high frequency loading Typ: Article  Autor: Vaško, Alan Datum: 2014

• Název: Pitting corrosion OF Cr-Ni-Mo stainless steel in presence of MoO42- chloride solution Typ: Article  Autor: Zatkalíková, Viera; Markovičová, Lenka Datum: 2014

• Název: Corrosion behaviour of the welded steel 1.4313/CA6-NM Typ: Article  Autor: Lovíšek, Martin; Liptáková, Tatiana; Pešlová, Františka Datum: 2014

• Název: Effect of cutting speed by laser on Thickness of heat affected zone of mild steel S235 Typ: Article  Autor: Meško, Jozef; Zrak, Andrej; Nigovič, Rastislav Datum: 2014

• Název: Comparison of pulse mode nd:yag laser assisted metal plastic joining with competitive technologies Typ: Article  Autor: Bauernhuber, Andor; Markovits, Tamás Datum: 2014

• Název: Experiment of tire-crown for computational modeling of tire Typ: Article  Autor: Krmela, Jan; Krmelová, Vladimíra; Beneš, Libor Datum: 2014

• Název: The impact of the seat support subassembly warping on loads distribution in slewing bearing during bodywork rotation Typ: Article  Autor: Krynke, Marek Datum: 2014

• Název: Changing the properties of the composite PA + GF to UV radiation Typ: Article  Autor: Markovičová, Lenka; Zatkalíková, Viera; Tor-Świątek, Aneta Datum: 2014

• Název: Internal damping depending on the vibration amplitude measured on specimens AZ31 and AZ91 in as cast state and after homogenization annealing Typ: Article  Autor: Dresslerová, Zuzana; Palček, Peter Datum: 2014

• Název: The weld toe improved by a laser remelting process in comparison with a classic TIG-dressing technology Typ: Article  Autor: Lago, Ján; Bokůvka, Otakar; Nový, František; Oravcová, Monika Datum: 2014

• Název: Experimental and numerical analysis of aluminium alloy fatigue lifetime under combined cycling bending - torsion loading Typ: Article  Autor: Uhríčik, Milan; Kopas, Peter; Palček, Peter Datum: 2014

• Název: The use efficiency of textile machines and equipment Typ: Article  Autor: Borkowski, Stanisław; Krynke, Marek Datum: 2014

Zobrazit další